Tadano FAUN ATF 220G-5 + JIB KRAAN/KRAN/CRANE/GRUA

https://customerimg-ed24.kxcdn.com/24756929-1-459863d8ac901f9277e9329c43c0f1c9.jpg?w=480
1788974
Tadano FAUN ATF 220G-5 + JIB KRAAN/KRAN/CRANE/GRUA
2015
28.605 km

General information

  • Id 1788974
  • Make Tadano
  • Type FAUN ATF 220G-5 + JIB KRAAN/KRAN/CRANE/GRUA
  • Year 2015
  • Operating hours 3.232
  • Mileage 28.605 km
  • Construction Crane

Technical specifications

  • First registration date 02-02-2015
  • Fuel Diesel
  • Weight 60.000 kg
  • Cylinder count 6
  • Power kw 138
  • Power hp 188
  • Lifting height 8.520 cm
  • Lifting capacity 220.000 kg

Extras

Send us a message Give us a call +31 488 74 54 74

Description

Make of bodywork: TADANO FAUN ATF 220G-5

TADANO ATF 220G-5 CRANE + JIB

FULL COUNTER WEIGHT 71 T.
UNDER CARRIER 28605 KM
1660 HOURS
AIRCO
AUTOMATIC GEARBOX
ADBLUE BLUETEC

UPPER CARRIER
3232 HOURS
AIRCO + HEATER
3 SHEAVES HOOLBLOCK 63 T
LOAD CAPASITY 220000 KG

Frame
Torsion resistant, welded construction made from
high strength, fine-grained steel. Central lubricating system.
Outriggers 4 point, double telescopic hydraulic outriggers
with controls on both sides of carrier and in superstructure
cab. Outrigger base 8.3 m (5.6 m mid extension) x 9.01 m.
Carrier engine Mercedes-Benz 8 cylinder model OM 502 LA
(Euromot III B / EPA TIER 4i), water-cooled diesel engine. Rated at
390 kW (530 HP) at 1800 min-1.
Torque 2400 Nm (245 kpm) at 1300 min-1.
Engine rating according to 80 /1269 / EWG. Fuel tank 530 l.
Transmission ZF-AS-Tronic 16 AS 2602 mechanical
transmission with electro-pneumatically operated dry-type
clutch and automatic gear shifting with 16 forward gears and
2 reverse gears.
Transfer Case Two stage.
Drive 10 x 8
Axles
1st axle: steered, driven
2nd axle: steered, driven.
3rd axle: not steered, not driven, lift axle.
4th axle: steered, driven, with longitudinal differential lock.
5th axle: steered, driven.
All driven axles with transverse differential locks.
Suspension Hydro-pneumatic with levelling adjustment.
Brake system Service brakes: dual circuit compressed air
system. Parking brake: spring loaded type acting on 2nd, 4th
and 5th axles. Auxiliary brakes: intarder, engine exhaust
brake and constant throttle engine brake system.
Tyres (10) 385/95 R 25.
Steering system ZF-Servocom, dual circuit hydraulic
steering with emergency steering pump, mechanical
hydraulically-assisted steering of front two axles and
automatic steering of the 4th axle up to a travel speed of
25 km/h and of the 5th axle up to 50 km/h.
Carrier cab Two man full width cab of composite (steel sheet
metal and fibre-glass) structure, with safety glass,
air-cushioned adjustable seats, engine dependent hot-water
heater. Complete controls and instrumentation for road travel.
Speed and brake control.
Electrical system 24 volt DC system, 2 batteries,
CAN-Bus system with Faun CSS integrated self-diagnosis
system, outrigger area lighting.
Electrical system conforms with EEC regulations.

Frame crane
Torsion-resistant, all-welded structure of high strength
steel. Connected to carrier by single-row ball-bearing slewing
ring with external gearing for 360° continuous rotation.
Central lubricating system.
Superstructure engine Mercedes-Benz 4 cylinder model
OM 924 LA (Euromot III B/EPA TIER 4i), water cooled, diesel engine.
Rated at 138 kW (188 HP) at 1800 min-1. Torque 750 Nm
(76 kpm) at 1200 - 1600 min-1.
Engine rating according to DIN 6270B / DIN 6271.
Fuel tank 250 l.
Hydraulic system Three circuit diesel hydraulic system with
1 double axial piston pump, 1 axial piston pump and 1 gear pump.
Controls Electrical, 2 joy-stick levers for simultaneous
operation of crane motions.
Telescopic boom 7 sections, made of high tensile, finegrained steel, consisting of 1 base section and 6 telescoping
sections extended by means of a single telescopic cylinder.
All telescope sections extendable under partial load.
13.2 m to 68.0 m long.
Derricking system 1 double acting hydraulic cylinder with
integral brake and holding valve.
Main winch Axial piston motor, winch drum with integrated
planetary reduction and with hydraulically controlled springloaded, multiple disc brake and with integrated free rotation
Hoist cable with 'Super-Stop' easy reeving system.
Slewing system Axial piston motor with three-stage planetary
gear with automatic service and a parking brake.
Closed hydraulic circuit with free slewing function.
Speed infinitely variable 0 - 1.2 min-1.
Counterweight Total 71 t divisible, assembled and disassembled
by hydraulic cylinders controlled from superstructure cab.
Superstructure cab Spacious panoramic cab of composite
structure with safety (tinted) glass windows, tiltable cockpit with
hydraulically cushioned adjustable seat, one engine dependent
hot water heater and one engine independent hot-water heater
(with engine pre-heat). Complete controls and instrumentation
plus LCD graphic display for crane operation.
Electrical system 24 volt DC system, 2 batteries.
Safety devices 'Lift Adjuster', load moment device (LMD),
anemometer, working area limiter, hoist limit switch, lower limit
switch and drum turn indicator, safety valves against pipe and
hose rupture, holding valves on hydraulic cylinders.

WIR SPRECHEN DEUTSCH
WE SPEAK ENGLISCH
HABLAMOS ESPANOL

Contact us

Interested in this Tadano FAUN ATF 220G-5 + JIB KRAAN/KRAN/CRANE/GRUA? Send us a message and we will contact you as soon as possible.

Message send. We will contact you as soon as possible.
Not all fields have valid content.
Error, message not send. Please try again or contact us.